Máy in Epson LQ-590II

Printing Technology:

Print Method: Impact dot matrix

Control Panel: 6 switches and 10 LEDs

Print Direction: Bi-direction

Control Code: ESC/P2, IBM PPDS

Number of Pins: 24

Print Speed:

Ultra High Speed Draft: 10 cpi: 550cps

High Speed Draft: 10 / 12 cpi: 487 / 584 cps

Draft: 10 / 12 cpi: 366 / 439 cps

NLQ: 10 / 12 cpi: 121 / 145 cps

Reliability:

Printhead Life: 400 million strokes / wire

Mean Print Volume Between Failure (MVBF): 50 million lines (except print head)

Mean Time Between Failure (MTBF): 25,000 Power On Hours (POH) (25% Duty)

Print Characteristics:

Character Sets: 1 Italic and 12 graphical character tables: Italic table, PC437 (US, StandardEurope), PC850 (Multilingual), PC860 (Portuguese), PC861 (Icelandic), PC865 (Nordic), PC863 (Canadian-French), Abicomp, BRASCII, Roman 8, ISO Latin 1, PC858, ISO 8859-15

Bitmap Fonts: 10, 12, 15 cpi

Scalable Fonts: Epson Roman / Sans Serif / Roman T / Sans Serif H: 10.5pt., 8pt - 32pt. (every 2pt.)

Barcode: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A , UPC-E, Code 39, Code 128, POSTNET

Paper Path:

Manual Insertion: Front or Rear in-Top out

Push Tractor: Front or rear in, top out

Pull Tractor: Front, rear or bottom in, top out

Paper Media:

Cut Sheet (Single Sheet): Entry: Front
Length: 100 - 364 mm (3.9 - 14.3”)
Width: 100 - 257 mm (3.9 - 10.1”)
Thickness: 0.065 - 0.14 mm (0.0025 - 0.0055”)
Entry: Rear
Length: 100 - 364 mm (3.9 - 14.3”)
Width:100 - 257 mm (3.9 - 10.1”)
Thickness: 0.065 - 0.14 mm (0.0025 - 0.0055”)

Cut Sheet (Multi-part Forms): Entry: Front
Length: 100 - 364 mm (3.9 - 14.3”)
Width: 100 - 257 mm (3.9 - 10.1”)
Thickness: 0.12 - 0.46 mm (0.0047 - 0.018”)
Copies: 1 Original + 5 copies

Continuous Paper (Single Sheet / Multi-part): Entry: Front, Rear, Bottom
Length: 101.6 - 558.8 mm (4.0 - 22.0”)
Width: 101.6 - 254 mm (4.0 - 10.0”)
Thickness: 0.065 - 0.49 mm (0.0025 - 0.019”)
Copies: Original + 6 copies

Envelope (No.6): Entry: Rear
Length: 92mm (3.6”)
Width: 165mm (6.5”)
Thickness: 0.16 - 0.52 mm (0.0063 - 0.0205”)

Envelope (No.10): Entry: Rear
Length: 105mm (4.1”)
Width: 241mm (9.5”)
Thickness: 0.16 - 0.52 mm (0.0063 - 0.0205”)

Label (Base Sheet): Entry: Bottom
Length: 101.6 - 558.8 mm (4.0 - 22.0”)
Width: 100 - 148 mm (3.9 - 5.8”)
Thickness: 0.16 - 0.19 mm (0.0063 - 0.0075”)

Card:Entry: Front, Rear
Length: 100 - 148 mm (3.9 - 5.8”)
Width: 100 - 148 mm (3.9 - 5.8”)
Thickness: 0.22mm (0.0087”)

Roll Paper: Entry: Rear
Diameter: 127mm (5”)
Width: 216mm (8.5”)
Thickness: 0.07 - 0.09 mm (0.0028 - 0.035”)

Line Spacing: 4.23mm (1/6”) or programmable in increments of 0.0706mm (1/360”)

Options:

Options: Single Bin Cut Sheet Feeder C12C806372
Pull Tractor Unit C12C933761
Ribbon Cartridge C13S015589
High Capacity Cut Sheet Feeder C12C806382

Input Data Buffer:

Input Data Buffer: 128KB

Interface:

Interface: USB 2.0, Bi-directional parallel USB 2.0, Bi-directional parallel
(IEEE-1284 nibble mode supported)

Printable Columns:

Pitch: 10cpi: 80 columns

Ribbon Cartridge:

Standard: Fabric Ribbon Cartridge (Black)

Ribbon Life: Approx. 5 million Characters