C9200-24T-E is the Catalyst 9200 24-port Data Switch, with Network Essentials software. Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular
uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.
C9200-24T-E Specification |
|
Downlinks total 10/100/1000 or PoE+ copper ports |
24 ports data |
Uplink configuration |
Modular uplink options |
Default primary AC power supply |
PWR-C5-125WAC |
Fans |
FRU redundant |
Software |
Network Essentials |
Chassis Dimensions |
1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm |
Weight |
5.0 Kg |
Virtual Networks |
4 |
Stacking bandwidth |
160 Gbps |
Total number of MAC addresses |
32,000 |
Total number of IPv4 routes (ARP plus learned routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
IPv4 routing entries |
4,000 |
IPv6 routing entries |
2,000 |
Multicast routing scale |
1,000 |
QoS scale entries |
1,000 |
ACL scale entries |
1,600 |
Packet buffer per SKU |
6 MB buffers for 24- or 48-port Gigabit Ethernet models |
Flexible NetFlow (FNF) entries |
16,000 flows on 24- and 48-port Gigabit Ethernet models |
DRAM |
4 GB |
Flash |
4 GB |
VLAN IDs |
4096 |
Total Switched Virtual Interfaces (SVIs) |
1000 |
Jumbo frames |
9198 bytes |
Wireless bandwidth per switch |
Up to 48 Gbps on 24-port and 48-port Gigabit Ethernet model |
Switching capacity |
128 Gbps |
Forwarding rate |
190.4 Mpps |
Mean time between failures (hours) |
587,800 |